HPE-160 gasoline engine drives ultra-high pressure hydraulic pump

Using intelligent circuit boards to enable one person to control inch movement, pressure holding, and fully automatic crimping operations

Hydraulic drive unit: adopts a dual pump structure of medium pressure gear pump and high-pressure plunger pump
Both types of hydraulic pumps are composed of precision machined components to form a hydraulic system
Formula, large capacity 10L hydraulic oil tank, can reduce overheating and pressure loss of oil pressure pump
to happen
Power Unit: Equipped with the latest Honda GX-160 air-cooled 4-stroke gasoline engine
Engine, low noise, low waste design, in compliance with EPA environmental regulations in Japan. quote
The engine power reaches up to 5.5HP/3600rpm. Equipped with automatic refueling function: crimping operation
Automatic acceleration during operation, the engine automatically switches to idle when not crimped, reducing steam consumption
Oil usage and exhaust emissions.
Using intelligent circuit boards to enable one person to control inch movement, pressure holding, and fully automatic crimping operations
Specifications:
Model Low pressure oil output High pressure oil output Hydraulic oil
Tank oil quantity, power dimensions, weight, attachments
HPE-160 0-140kgf/cm2
7.5L per minute
140-700kgf/cm2
1.5L 10 liters per minute Honda GX160
Gasoline engine
665x405
X445mm 61kg 10m remote control cable
Operation switch
30-year longevity product
pressure gauge
fully automatic
semi-automatic
Counting table
pressure switch
Control circuit board
Manual operating lever
solenoid directional control valve
Pressure safety valve
GX-160 Engine Technical Specifications
Model GX160T
Displacement (C.C) 294kN
Maximum horsepower (HP/rpm) 5.5/3600
Maximum torque (Kgm/rpm) 1.1/2500
Compression ratio 8.5:1
Cylinder inner diameter x stroke mm 68x45
Fuel consumption g/Hp/Hr 230/1/1
Ignition method: electronic ignition
Fuel tank 92 or 95
unleaded gasoline
Fuel tank capacity (L) 3.6
Oil capacity (L) 0.6
Start mode manually
Net weight (Kg) 15
Inflatable casters
10 meter remote control cable control switch
Control unit: It has both fully automatic and semi-automatic operation functions. Fully automatic is used for frequent repetitive work situations, and only one button is needed to fully complete the crimping operation automatically
After operation, the compression tool piston will automatically retract completely, without having to constantly press and hold the buckle switch; Semi automatic operation by staff based on work requirements and external tool operation
Control the buckle switch for construction operations.
The pressure safety valve is set at 800 bar and the working pressure valve is rated at 700 bar. The rated working pressure is set using a pressure switch, and the pressure is easy to adjust. Double pressure
The control system can prevent overpressure and surge, and the pressure control is more precise, safe, and convenient, ensuring the smooth construction of the crimping sleeve operation. It adopts dual electromagnetic directional valve line control
In addition to switch operation, manual operation push rods can also be added, and if necessary, they can temporarily replace wire controlled switches. Using circuit board operation to switch electromagnetic directional valve with wired connection
Remote control buckle switch, forming a more effective crimping operation control system. One person can control the pump, perform inching, pressure holding, and crimping operations to avoid high pressure
The pressure relief valve malfunctioned due to excessive operation.
Auxiliary accessories:
Adopting the Parker TC-370 lock free ultra-high pressure quick connector from the United States, it can withstand a burst pressure of 2800 Bar.
The body is equipped with a high-pressure gauge to monitor whether the pressure has reached the specified value.
Equipped with an iron sheet protective cover to protect the hydraulic control components from collisions.
Equipped with a task counting table, it is helpful for maintenance records.
choose:
Oil pipes for selection: It is recommended to use 3 meters and 10 meters, with a maximum length of 15 meters.
Inflatable large wheels, helpful for handling or moving.